Aputure Storm 1200x Reflector Kit
20,00 € + VAT
The Aputure Storm 1200x Reflector Kit includes two optical reflectors, 15° and 30°, designed to focus and control the beam of the STORM 1200x. Available to hire from SIDEREUS in Milan, the kit increases light intensity on the subject and lets you work at different lighting distances.
Features
- – Included reflectors: 15° Narrow and 30° Medium
- – Illuminance at 3 m, 5600 K: 96,100 lux (15°) and 41,800 lux (30°)
- – In the kit: two reflectors and a carry case
Details
Beam control
The Aputure Storm 1200x Reflector Kit gives you more control over the STORM 1200x beam with two reflector angles. Both are designed to produce an even spread without pronounced hotspots or colour fringing at the edges.
The 15° Narrow reflector produces a tight, intense beam for lighting subjects at greater distances or placing light precisely with limited spill.
The 30° Medium reflector gives a broader beam for covering larger areas. It is a middle ground when you need good intensity without focusing the output too tightly.
STORM 1200x photometric performance
With the STORM 1200x set to 5600 K, Aputure specifies 96,100 lux at 3 m with the 15° reflector and 41,800 lux with the 30° reflector. At 5 m, the published figures are 33,300 lux for the Narrow and 14,100 lux for the Medium. These figures help you choose the reflector based on distance and the illuminance required on the subject. Measurements are for the STORM 1200x under the manufacturer’s stated test conditions.
Build and kit contents
The 15° reflector measures approximately 32 × 41.4 cm and weighs 1.4 kg. The 30° reflector measures approximately 23 × 33 cm and weighs 900 g. Both fit the STORM 1200x ProLock Bowens mount. The padded case protects the reflectors in transit and has room for the standard 45° reflector, which is not included in the kit.
Mounting and safety
Before use, check that the reflector is properly seated and locked onto the ProLock mount. Account for its weight when positioning and balancing the fixture on its stand. A concentrated beam produces high light intensity. Follow the specified safety distances from heat-sensitive materials and illuminated surfaces, and avoid pointing the beam at anyone’s eyes. Follow the manufacturer’s instructions when changing reflectors and take care around surfaces that may still be hot after use.
Available to hire from SIDEREUS in Milan, this kit is intended for film, commercial and television productions that need precise beam control. Its two reflectors give the STORM 1200x narrow and medium beam options while maintaining high intensity at longer distances.






